Changes to Step #12
Edit by Paige Reisman —
Edit approved by Paige Reisman
- Before
- After
- Unchanged
Step Lines
[* black] Use the flat end of a spudger to disconnect the Facetime camera connector from its socket on the logic board. |
[* black] Pry up the adhesive attaching the Facetime camera cable to the audio jack cable [* black] Fold the Facetime camera cable up and out of the way. |
[* black] Pry up the adhesive attaching the Facetime camera cable to the audio jack cable [* black] Fold the Facetime camera cable up and out of the way. |