Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #13

Edit by Paige Reisman

Edit approved by Paige Reisman

Before
After
Unchanged

Step Lines

[* black] getDisconnect the headphone jack cable connector from its socket on the logic board.
[* black] Pry the cable up to free it from the adhesive securing it to the rear case.
[* black] Pull
the audio jack ribbon cable out of the wayway.
[* black] getDisconnect the headphone jack cable connector from its socket on the logic board.
[* black] Pry the cable up to free it from the adhesive securing it to the rear case.
[* black] Pull
the audio jack ribbon cable out of the wayway.