Skip to main content

Changes to Step #7

Edit by Luke Soules

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the following 15 screws:
[* red] One 4.4 mm black Phillips screw to the right of the ram slot.
[* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.