Skip to main content

Changes to Step #3

Edit by Troy Pozirekides

Pending approval

Before
After
Unchanged

Step Lines

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each cable and lifting up. These connectors have two parts, you need to make sure that you pry up the TOP PIECE ONLY, not the bottom part that is soldered onto the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each cable and lifting up. These connectors have two parts, you need to make sure that you pry up the TOP PIECE ONLY, not the bottom part that is soldered onto the board.