Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Zachary Pyle

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereUnsnap small ribbon cable connected to keypad by flipping up the black plastic snap and gently pulling out the ribbon cable using tweezers.
[* black] Remove screw on left side of circuit board above ribbon cable (0.124 in long; use Phillips 00 attachment) with screen facing down and charger pointed towards you).
[* icon_caution] WARNING: Do not over-tighten during reassembly
.
[* black] Insert wisdom hereUnsnap small ribbon cable connected to keypad by flipping up the black plastic snap and gently pulling out the ribbon cable using tweezers.
[* black] Remove screw on left side of circuit board above ribbon cable (0.124 in long; use Phillips 00 attachment) with screen facing down and charger pointed towards you).
[* icon_caution] WARNING: Do not over-tighten during reassembly
.