Skip to main content

Changes to this Step

Edit by Austin Cade

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] TheTo use the multimeter, place red probe on the marked positive (+) end of the battery and the black probe on the marked negative (-) end of the battery.
[* black] TheTo use the multimeter, place red probe on the marked positive (+) end of the battery and the black probe on the marked negative (-) end of the battery.
[* black] Hold the probes in place until the measurement appears on the screen of the multimeter.
[* black] The voltage should be around 3.6 volts. If the measurement is significantly lowerlower than 3.6 volts, the battery needs to be replaced.
[* black] The voltage should be around 3.6 volts. If the measurement is significantly lowerlower than 3.6 volts, the battery needs to be replaced.