Skip to main content

Changes to Step #9

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

-[* icon_caution] If you feel a lot of resistance or the gasket starts to tear, repeat the previous iOpener step.
+[* icon_caution] In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing.
[* black] Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.