Skip to main content

Changes to Step #9

Edit by Dante Mazzanti

Edit approved by Dante Mazzanti

Before
After
Unchanged

Step Lines

-[* black] Use the pointed end of a spudger to gently pry the Home Button and gasket up from the display assemble.
-[* icon_caution] If you feel a lot of resistance or the gasket starts to tear, go back and repeat the previous step.
+[* icon_caution] If you feel a lot of resistance or the gasket starts to tear, repeat the previous iOpener step.
+[* black] Use the pointed end of a spudger to gently pry the Home Button assembly up from the display assembly.