Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Slide the pick along the edge of the display, towards the headphone jack.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, followrepeat the iOpener heating procedure and reapplyapply additional heat.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, followrepeat the iOpener heating procedure and reapplyapply additional heat.
[* icon_caution] Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
[* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch into the iPad.