Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #24

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Continue lifting the display assemblyassembly from the front-facing camera side.
[* black] Pull the display slightly away from the Lightning connectorbottom edge to completely free it fromseparate the adhesiveadhered components.
[* black] ContinueKeep lifting until the front panel from the camera side until itassembly is roughly perpendicular to the casebody of the iPad.
[* black] Continue lifting the display assemblyassembly from the front-facing camera side.
[* black] Pull the display slightly away from the Lightning connectorbottom edge to completely free it fromseparate the adhesiveadhered components.
[* black] ContinueKeep lifting until the front panel from the camera side until itassembly is roughly perpendicular to the casebody of the iPad.
[* icon_caution] Do '''not''' attempt to fully separate the components yet—there are three ribbon cables trapped beneath a connector bracket.