Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #24

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereContinue lifting the display assembly.
[* black] Pull the display slightly away from the Lightning connector edge to completely free it from the adhesive.
[* black] Continue lifting the panel from the camera side until it is roughly perpendicular to the case.
[* icon_caution] Do '''not''' attempt to fully separate the components yet—there are three ribbon cables trapped beneath a connector bracket
.
[* black] Insert wisdom hereContinue lifting the display assembly.
[* black] Pull the display slightly away from the Lightning connector edge to completely free it from the adhesive.
[* black] Continue lifting the panel from the camera side until it is roughly perpendicular to the case.
[* icon_caution] Do '''not''' attempt to fully separate the components yet—there are three ribbon cables trapped beneath a connector bracket
.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version