Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to this Step

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereSlide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen
.
[* black] Insert wisdom hereSlide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen
.