Skip to main content

Changes to Step #5

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

-[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
+[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel from from the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
-[* black] Place an opening pick in the separation to prevent the adhesive from resealing.
+[* black] Insert an opening pick in the gap to prevent the adhesive from resealing.