Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Dante Mazzanti

Edit approved by Dante Mazzanti

Before
After
Unchanged

Step Lines

[* black] Carefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing.