Skip to main content

Changes to Step #5

Edit by Andrew W.

Edit approved by Andrew W.

Before
After
Unchanged

Step Lines

+[* black] Carefully place a suction cup towards the top edge of the iPad
+ [* black] Be sure the cup is completely flat on the screen to get a tight seal.
+[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
+[* black] Place an opening pick in the separation to prevent the adhesive from resealing.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added