Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* icon_note] The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it for no more than 30 seconds, and lay it over the iPad for about two minutes each time you use it.
[* black] Handling it by the tabs on either end, place a heated iOpener over the top edge of the iPad.
[* black] Let the iOpener sit for two minutes to soften the adhesive securing the front panel to the rest of the iPad.