Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #12

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Gently folding the righ-mostright-most battery cells out of the way, insert a plastic card under the right center cell.
[* black] Push the card in about half of its length to cut the adhesive holding itthe battery cell to the case.
[* black] Gently folding the righ-mostright-most battery cells out of the way, insert a plastic card under the right center cell.
[* black] Push the card in about half of its length to cut the adhesive holding itthe battery cell to the case.
[* icon_caution] Be sure to avoid the trackpad control board. Aim the card up toward the logic board, where the adhesive is.
[* black] Leave the card in place to keep the adhesive from re-sealing.