Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #11

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Leave the second card in the corner between the two left cells.
[* black] Reheat the iOpenerIf using an iOpener, reheat it and apply it to the central battery cells.
[*

[*
black] AgainAs before, leave itthe iOpener in each position for about a minute, reheating in between, to heat each half of the center cells.
[* black] In the following steps, you can either use a third card, or the card from the right corner. The right corner adhesive should be dry/cool enough that the cells can easily be pulled up again when needed.
[* black] Reheat the iOpenerIf using an iOpener, reheat it and apply it to the central battery cells.
[*

[*
black] AgainAs before, leave itthe iOpener in each position for about a minute, reheating in between, to heat each half of the center cells.
[* black] In the following steps, you can either use a third card, or the card from the right corner. The right corner adhesive should be dry/cool enough that the cells can easily be pulled up again when needed.