Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* icon_note] OrientLay the rear glass so you are facing the inside of the panel face-up and rotate it so that the lens holes for the camera and heart rate monitor are toon your right.
[* icon_note] OrientLay the rear glass so you are facing the inside of the panel face-up and rotate it so that the lens holes for the camera and heart rate monitor are toon your right.
[* black] Grasp the adhesive from both sides and align the tape over the rear glass.
[* icon_note] Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.
[* black] Lay the adhesive on top of the glass.