Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Mounir Karmada

Edit approved by Mounir Karmada

Before
After
Unchanged

Step Lines

[* black] Lift the ribbon of the plastic inner casingframe.
[* black] Lift the ribbon of the plastic inner casingframe.
[* icon_note] You may have to warm the adhesive using an iOpener to avoid damaging the ribbon.
[* red] Remove the six 1.2 mm screws off the inner plastic casingframe.
[* black] Slide the ribbon through the slot on the inner casing andframe, then pull the casingframe away.
[* red] Remove the six 1.2 mm screws off the inner plastic casingframe.
[* black] Slide the ribbon through the slot on the inner casing andframe, then pull the casingframe away.