Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Josh Brown

Edit approved by Josh Brown

Before
After
Unchanged

Step Lines

[* black] Lift the ribbon off the plastic inner frame.
[* icon_note] You may have to warm the adhesive using an iOpener to avoid damaging the ribbon.
[* red] Remove the six 1.2 mm #00 screws offfrom the inner plastic frame.
[* red] Remove the six 1.2 mm #00 screws offfrom the inner plastic frame.
[* black] Slide the ribbon through the slot on the inner frame while pulling the frame away.

Image 2

Old Version

New Version