Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Mounir Karmada

Edit approved by Mounir Karmada

Before
After
Unchanged

Step Lines

[* black] Remove the inner casing
[* black] Lift
Lift the ribbon tab throughof the metal slot underneath
[*
plastic inner casing.
[*
icon_note] You may have to warm the adhesive using an iOpener to avoid damaging the ribbon.
[* red] Remove the six 1.2 mm screws off the inner plastic casing.
[* black] Slide the ribbon through the slot on the inner casing and pull the casing away.
[* black] Remove the inner casing
[* black] Lift
Lift the ribbon tab throughof the metal slot underneath
[*
plastic inner casing.
[*
icon_note] You may have to warm the adhesive using an iOpener to avoid damaging the ribbon.
[* red] Remove the six 1.2 mm screws off the inner plastic casing.
[* black] Slide the ribbon through the slot on the inner casing and pull the casing away.

Image 2

No previous image

Added

Image 3

No previous image

Added