Changes to Step #10
Edit by iRobot —
- Before
- After
- Unchanged
Step Lines
[* black] More screws and prying with the plastic opening tool. |
[* red] The magnets in the corners of the rear LCD bezel allow the display to snap into place for either netbook or tablet usage. |
[* orange] The offset magnets are used to tell the computer what orientation the LCD is in (tablet or Netbook). Remember [ |
[* orange] The offset magnets are used to tell the computer what orientation the LCD is in (tablet or Netbook). Remember [ |
[* black] The switches on the underside of the upper case are Field-Effect Transistors ([http://en.wikipedia.org/wiki/FET|FET]), which alter their conductivity in the presence of a magnetic field. The offset magnets in the rear bezel cause the FETs to indicate which position the screen is in. |
[* black] Apparently we are [http://media.smashingmagazine.com/cdn_smash/wp-content/uploads/uploader/images/signs/please-do-not-touch/full_please-do-not-touch.jpg|not supposed to touch] the inverter board. This is likely due to the frailty of the connections between the board and the LCD cables. |