Skip to main content

Changes to Step #2

Edit by Jay Miley

Edit approved by Jay Miley

Deleted
Added
Unchanged

Step Lines

[* red] Following the procedure from steps 19 & 20, open and disconnect the ZIF cable closecloser to the centeredge of the circuitlogic board.
[* icon_note] The front camera ZIF connector latch on the cable side instead of being opposite the cable. It is still the white part, not the black part as previous ZIF connector latches have beenlever.
[* red] Following the procedure from steps 19 & 20, open and disconnect the ZIF cable closecloser to the centeredge of the circuitlogic board.
[* icon_note] The front camera ZIF connector latch on the cable side instead of being opposite the cable. It is still the white part, not the black part as previous ZIF connector latches have beenlever.