Skip to main content

Changes to Step #6

Edit by wilfried

Edit declined by Geoff Wacker

Deleted
Added
Unchanged

Step Lines

[* icon_note] If you are not replacing the headphone jack assembly with a new unit, skip this step.
[* black] Use the edge of a plastic opening tool to peel the electronic portion of the silent switch off its metal bracket.
[* black] Transfer the bracket to the new silent switch.
[* black] make sure the switch position is the same as from the switch you removed
[* black] Repeat this procedure to peel the metal volume button bracket off the electronic portion of the volume buttons.
[* black] Transfer the volume button bracket to the new volume buttons.