Changes to this Step
Edit by TronicsFix —
Edit approved by TronicsFix
- Before
- After
- Unchanged
Step Lines
| [title] Disconnect WiFi Antenna |
| [* black] The power supply can lifted out and rotated down and set on the workbench. |
| [* black] Be very careful not to pull on the power supply as it will still be connected to the motherboard. |
| [* black] Use ESD-safe tweezers to carefully disconnect the wi-fi antenna by pulling it straight up. |
| [* black] Be be careful not to apply too much force on the WiFi connector as it can break off. |
| [* icon_caution] '''Do NOT''' use pliers as shown in this hastily taken photo. |
| [* black] After the WiFi cable is disconnected, de-route the cable from the two clips and under the optical drive cable. |