Skip to main content

Changes to Step #15

Edit by Rose Hulsman

Edit approved by Rose Hulsman

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Be gentle when handling theseCarefully and gently handle the wires and connectors. Theycables in the printer. They may break or bend, rendering your printer inoperable.
[* icon_caution] Be gentle when handling theseCarefully and gently handle the wires and connectors. Theycables in the printer. They may break or bend, rendering your printer inoperable.
[* red] Remove the ribbon cable by pulling directly along the cable.
[* orange] Remove the white connector by pressing down on the tab and pulling out.
[* yellow] Pull the purple wire connectors directly out. You do not need to mark which cable goes where, as they are all unique sizes.
[* green] Remove the white connector as described inby pressing down on the orange bullettab and pulling out.
[* green] Remove the white connector as described inby pressing down on the orange bullettab and pulling out.