Skip to main content

Changes to Step #15

Edit by Jay Miley

Edit approved by Jay Miley

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Be gentle when handling these wires and connectors. They may break or bend, rendering your printer inoperable.
[* red] Remove the ribbon cable by pulling directly along the cable.
[* orange] Remove the white connector by pressing down on the tab and pulling out.
[* yellow] Pull the purple wire connectors directly out. You do not need to mark which cable goes where, as they are all unique sizes.
[* green] Remove the white connector as described in the orange bullet.

Image 1

Old Version

New Version

Image 2

No previous image

Added