Skip to main content

Changes to Step #5

Edit by Miroslav Djuric

Pending approval


Step Lines

[* black] Grasp the end of the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand.
[* icon_note] Make sure the logic board is lifted slightly above the white plastic notch on the battery side of the board. This notch prevents the board from sliding out in the next step.
[* black] Slide the logic board out of its holding brackets on the rear of the display.
[* icon_note] The logic board is still connected to the iPod by two ribbon cables.

Image 1

No previous image