Skip to main content

Changes to Step #5

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Repeat the previous steps to separate the right side of the rear display bezel from the display.
[* black] Use your spudger to pry the plastic retaining clips on the rear display bezel over the raised aluminum tabs on the front display bezel.
[* black] At this point, the clips on the left and right edges of the rear display bezel should be free from the raised aluminum tabs on the front display bezel. If they are not, use a spudger to pry them past the front display bezel.

Image 1

No previous image

Added

Image 2

No previous image

Added