Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #9

Edit by Steve Godun

Edit approved by Steve Godun

Before
After
Unchanged

Step Lines

[* black] Use a pair of tweezers to gently lift the vibrator offout of its crevace. It is held in only with friction, no adhesive or screws. Be careful when lifting to avoid damaging the wires connecting it to the motherboard.
[* black] Use a plastic opening tool or your handsa spudger to gently pry the motherboard out of the case. lift first from the top (near the camera).
[* icon_note] The motherboard is secured with adhesive,adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heatgunheat gun to loosen the adhesive. Refer to the [guide|11677|iOpener guide|new_window=true] for info on this.
[* black] Use a pair of tweezers to gently lift the vibrator offout of its crevace. It is held in only with friction, no adhesive or screws. Be careful when lifting to avoid damaging the wires connecting it to the motherboard.
[* black] Use a plastic opening tool or your handsa spudger to gently pry the motherboard out of the case. lift first from the top (near the camera).
[* icon_note] The motherboard is secured with adhesive,adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heatgunheat gun to loosen the adhesive. Refer to the [guide|11677|iOpener guide|new_window=true] for info on this.