Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #9

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Before
After
Unchanged

Step Lines

[* black] Lift out the rotational vibrator using theUse a pair of tweezers and thento gently peal backlift the vibrator off of the motherboard.
[* black] Use a plastic opening tool or your hands to pry the motherboard out of the case.
[*
icon_note] The mother boardmotherboard is gluedsecured with epoxyadhesive, so you may need to use an iOpener or heatgun to loosen the back ofadhesive. Refer to the battery so firmly pull[guide|11677|iOpener guide|new_window=true] for info on this.
[* black] Lift out the rotational vibrator using theUse a pair of tweezers and thento gently peal backlift the vibrator off of the motherboard.
[* black] Use a plastic opening tool or your hands to pry the motherboard out of the case.
[*
icon_note] The mother boardmotherboard is gluedsecured with epoxyadhesive, so you may need to use an iOpener or heatgun to loosen the back ofadhesive. Refer to the battery so firmly pull[guide|11677|iOpener guide|new_window=true] for info on this.