Skip to main content

Changes to Step #3

Edit by Andy Tate

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* icon_caution] Steps three through five are for your newly bought trigger assembly.
-[* icon_caution] Be careful not to cut the wire during this step.
+[* icon_caution] The next steps are for your new trigger assembly.
+[* icon_caution] Be careful not to cut the wire while stripping the insulation off.
[* black] Strip both the white wire of your ***++new ++*** trigger assembly, and the white wire coming out of the translucent orange fuse about a quarter inch with 16 gauge wire strippers.