Skip to main content

Changes to Step #1

Edit by Kristen Gismondi

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

[* icon_caution] ++***DO NOT***++ attempt to desolder the white shrink wrapped wire located at the bottom left of the trigger assembly. It requires advanced soldering techniques and isn't necessary.
-[* icon_caution] ++CAUTION ++ The soldering iron is hot and could burn you.
+[* icon_caution] The soldering iron is hot and could burn you.
[* icon_reminder] Take note of where each wire is attached to the trigger assembly for resoldering the new trigger.
[* red] Use the soldering iron to desolder and remove the red, blue, and three black wires.
[* icon_note] If you don't know how to desolder, or need to brush up on your skills, iFixit posted a [guide|750|How To Solder and Desolder Connections guide].