Skip to main content

Changes to Step #1

Edit by Anna Stauffer

Edit approved by Anna Stauffer

Before
After
Unchanged

Step Lines

[* icon_caution] ++***DO NOT***++ attempt to desolder the white shrink wrapped wire located at the bottom of left of the trigger assembly. It requires advanced soldering techniques and isn't necessary.
-[* red] Desolder and remove the external wires from the trigger assembly, except for the white wire on the bottom left.
-[* icon_note] You should have desoldered five wires (red, blue, and 3 black) and left one thick white wire attached to the assembly.
+[* icon_reminder] Take note of where each wire is attached to the trigger assembly for resoldering the new trigger.
+[* red] Desolder and remove the red, blue, and three black wires.
[* icon_note] If you don't know how to desolder, or need to brush up on your skills, iFixit posted a [guide|750|How To Solder and Desolder Connections guide].
-[* icon_reminder] Take note of where each wire is attached to the trigger assembly for resoldering.