Skip to main content

Changes to Step #1

Edit by Nathan Hoyt

Edit approved by Nathan Hoyt


Step Lines

+[* icon_caution] ++***DO NOT***++ attempt to desolder the white shrink wrapped wire located at the bottom of left of the trigger assembly. It requires advanced soldering techniques and isn't necessary.
+[* red] Desolder and remove the external wires from the trigger assembly except for the white wire on the bottom left.
+[* icon_note] You should have desoldered five wires and have one wire left attached to the assembly.
+[* icon_note] If you don't know how to desolder, or need to brush up on your skills, iFixit has a [guide|750|How To Solder and Desolder Connections guide].