Skip to main content

Changes to Step #2

Edit by Yosef

Edit approved by Yosef

Before
After
Unchanged

Step Lines

[title] Detach antenna wire from battery case
[* black] Carefully split/cut the copper tape (which protects parts of the motherboard from heat) with a razor blade to allow removal of the antenna wire.
[* icon_caution] Be careful not to cut too deep and damage the wire.
[* red] Unclip the antenna wire from the motherboard.
+[* violet] Unclip the antenna wire from each clip on the battery case.
[* icon_note] Be careful not to rip the wire, however the wire should be strong enough and should come out with enough force.