Skip to main content

Changes to Step #1

Edit by Yosef

Edit approved by Yosef

Before
After
Unchanged

Step Lines

[title] Open the Kindle
[* black] Wedge a plastic opening tool into the lower right corner of the Kindle Fire.
[* black] Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other.
-[* icon_note] If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger (or a small metal flathead screwdriver) to undo the first clip, then switch back to the opening tool to avoid scratching your case.
-[* icon_note] The case is held on by clips along the perimeter of the bottom half of the Kindle. Zoom into the image to see where these clips are located.
+ [* icon_note] If you are having difficulty inserting the plastic opening tool, carefully use a metal spudger (or a small flathead screwdriver) to undo the first clip, then switch back to the opening tool to avoid scratching your case.
+ [* icon_reminder] The case is held on by clips along the perimeter of the bottom half of the Kindle. Zoom into the image to see where these clips are located.

Image 2

Old Version

New Version

Image 3

Old Version

New Version