Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #11

Edit by Matthew Veith

Edit approved by Matthew Veith

Before
After
Unchanged

Step Lines

[* black] Once the cords are reconnected, slidslide the stereo back into the housing. It will click into place
[* black] Once the cords are reconnected, slidslide the stereo back into the housing. It will click into place
[* black] Note: Do not force the stereo into place. If it doesn't slid in smoothly, most likely the wiring is in the way and should be adjusted to prevent damage
[* black] Snap the final molding back into place to complete the dash.