Skip to main content

Changes to Step #4

Edit by Geoff Wacker

Edit approved by Geoff Wacker

Before
After
Unchanged

Step Lines

[* black] Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly.
[* black] Use a plastic opening tool to gently pry the motherboard free of the display assembly.
+[* icon_note] At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the [guide|41993|bottom speaker guide|stepid=96685|new_window=true] to swap your existing speaker to the new motherboard.