Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #5

Edit by Megan Rund

Edit approved by Megan Rund


Step Lines

[* red] To detach the larger wire ribbon, lift the release latch on the connector of the circuit board by lifting it up. Remove the wire ribbon with tweezers.
[* orange] Now remove the smaller wire ribbon by pulling on it firmly but gently.
[* black] Use the curved tip tweezers to carefully remove the green circuit board out from under the two clips holding it in place.
[* icon_caution] The wire ribbons are very delicate; be very cautious when detaching them!