Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #5

Edit by Kelly Fitzgerald

Edit approved by Kelly Fitzgerald

Deleted
Added
Unchanged

Step Lines

[* red] To detach the larger wire ribbonribbon, lift the release latch on the connector onof the circuit board. Theboard by lifting it up. Remove the wire ribbon can then easily be removedwith tweezers.
[* red] To detach the larger wire ribbonribbon, lift the release latch on the connector onof the circuit board. Theboard by lifting it up. Remove the wire ribbon can then easily be removedwith tweezers.
[* orange] Now remove the smaller wire ribbon by pulling on it firmly but gently.
[* black] Use the curved tip tweezers to carefully remove the green circuit board out from under the two clips holding it in place.
[* icon_caution] The wire ribbons are very delicate; be very cautious when detaching them!