Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Kristen Gismondi

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

[* black] Push the flat edge of a nylon or metal spudger between the seal and the toothbrush body and pry it up. Do this on each side until the seal is partially sticking out on all sides.
[* black] Push the flat edge of a nylon or metal spudger between the seal and the toothbrush body and pry it up. Do this on each side until the seal is partially sticking out on all sides.