Skip to main content

Changes to Step #2

Edit by Scott Kaufman

Edit approved by Scott Kaufman

Before
After
Unchanged

Step Lines

+[* red] Set the low bound by shifting the rear derailleur to its 1st gear position. Adjust the screw labeled with a L, so the derailleur lines up vertically with the 1st gear.
+[* orange] If you are unable to get the low bound over far enough by adjusting the screw, try tightening the cable using the adjustment cable found on the shifter itself.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added