Skip to main content

Changes to Step #1

Edit by Scott Kaufman

Edit approved by Scott Kaufman

Before
After
Unchanged

Step Lines

+[* icon_note] First, we need to set the high and low bounds on position that the derailleur can travel to.
+[* red] Shift the rear derailleur so it is in the 8th gear position.
+[* orange] Using the phillips head screw driver, adjust the screw labeled with an H so that the derailleur lines up vertically with the 8th gear (the smallest one).

Image 1

No previous image

Added

Image 2

No previous image

Added