Skip to main content

Changes to Step #1

Edit by Jose Pedro Kitajima Borges

Edit approved by Jose Pedro Kitajima Borges

Before
After
Unchanged

Step Lines

[* icon_note] First, we need to set the high and low bounds on position that the derailleur can travel to.
-[* red] Shift the rear derailleur so it is in the 8th gear position.
-[* orange] Using the phillips head screw driver, adjust the screw labeled with an H so that the derailleur lines up vertically with the 8th gear (the smallest one).
+[* black] Shift the rear derailleur so it is in the 8th gear position.
+[* red] Using the phillips head screw driver, adjust the screw labeled with an H so that the derailleur lines up vertically with the 8th gear (the smallest one).

Image 1

Old Version

New Version

Image 2

Old Version

New Version