Skip to main content

Changes to Step #8

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

-[* black] If applicable, peel off the tab from the back of the new battery, exposing the adhesive.
+[* icon_note] If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.
[* black] Rotate the battery down into its slot, and press it into position.
-[* icon_note] Press the battery down against the S1 to re-adhere it in place.
+[* black] Press the battery down against the S1 to re-adhere it in place.
[* icon_note] Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.