Skip to main content

Changes to Step #4

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] Lay the backed adhesive tape down on the NFC antenna, around the edge of the case where the screen rests.
+[* black] Lay the backed adhesive tape down on the Force Touch sensor, around the edge of the case where the screen rests.
[* black] Start in a corner with the tape as close to the corner wall as possible.
[* black] Press on the brown backing paper with a plastic opening tool to secure the adhesive around the entire perimeter.