Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] The upper half ofGrab the display connector bracket is held at the upper end by a metal tab that fits into a slot in the lower bracket.
[* black] Grab the upper bracket
cover with your tweezers and slide it toward the top of the watch to disengage this tab and free the bracketfinal slotted tab, and remove the cover.
[* icon_reminder] To reassemble, set the cover in place and slide it in the opposite direction to secure the large slotted tab. Then simply press down on the cover to click the other two smaller tabs into place
.
[* black] The upper half ofGrab the display connector bracket is held at the upper end by a metal tab that fits into a slot in the lower bracket.
[* black] Grab the upper bracket
cover with your tweezers and slide it toward the top of the watch to disengage this tab and free the bracketfinal slotted tab, and remove the cover.
[* icon_reminder] To reassemble, set the cover in place and slide it in the opposite direction to secure the large slotted tab. Then simply press down on the cover to click the other two smaller tabs into place
.