Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #3

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart


Step Lines

[* icon_note] The bracket that contains the display and digitizer cable connections is made up of an upper and lower piece. The connectors are secured to the lower, and the upper must be removed to disconnect them.
[* black] Use fine-tipped tweezers to grasp the lower half of the bracket.
[* icon_note] There is a small metal tab that protrudes downward from the upper metal bracket.
[* black] Insert a small (1 mm) flathead screwdriver between the tab and the lower bracket, and rotate the screwdriver to spread the gap.
[* black] This will release two tabs that hold the upper bracket to the lower, and should free the upper bracket.